Use .187" crimps for the micro switch on arcade buttons

Use these .187" male crimps with our pre-made female crimp wires to make microswitch extension cables.

4" long wire with a .187" female quick disconnect on one end and a .110" male quick disconnect on the other end for connecting .187" switches to .110" wires.

1 player arcade wiring kit for I-PAC

2 player arcade wiring kit for I-PAC

30 .187" female quick disconnects daisy-chained together to easily connect the ground wires on your buttons and joysticks.

1 meter (39") long 22AWG stranded wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.

1 meter (39") long 22AWG stranded wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.

1 meter (39") long 22AWG stranded wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.

1 meter (39") long 22AWG stranded wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.

1 meter (39") long 22AWG stranded wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.

1 meter (39") long 22AWG stranded wire with .187" female quick disconnect on one end and stripped wire on the other for easy joystick and button hookups.

Bundle of 33 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting buttons and joysticks to the Ultimarc Ultimate I/O Controller. Plugs directly into Ultimate I/O board. Include a black daisy-chain wire with 32 0.187" (4.8mm) spade connectors for the ground connections.

Bundle of 33 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting joysticks and 0.110" (2.8mm) spade connectors for connecting our Goldleaf buttons, or others with .110" connectors, to the Ultimarc Ultimate I/O Controller. Plugs directly into Ultimate I/O board. Include a black daisy-chain wire with 0.187" (4.8mm) spade connectors for the ground connections on joysticks and 0.110" (2.8mm) spade connectors for ground connections on the buttons.

Two harnesses with 8 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting buttons and joysticks to the Ultimarc Ultimate I/O Controller. Plugs directly into the Player 3-4 connectors on the Ultimate I/O board. Include a black daisy-chain wire with 32 0.187" (4.8mm) spade connectors for the ground connections.

32 .187" female quick disconnects daisy-chained together to easily connect the ground wires on your buttons and joysticks, with 1 male .187" connector on the end to connect to the ground wire on an Ultimate 1-2 Player harness

4" long wire with a .187" male quick disconnect on one end and a .110" female quick disconnect on the other end for connecting .110" switches to .187" wires.

Two harnesses, one with 0.187in (4.8mm) spade connectors for joysticks and one with 0.110" (2.8mm) spade connectors for goldleaf buttons, for the Ultimarc Ultimate I/O Controller. Plugs directly into the Player 3-4 connectors on the Ultimate I/O board. Includes black daisy-chain wires for the ground connections.

Bundle of 10 wires, 23" long, with 0.187" (4.8mm) spade connectors for connecting joysticks/buttons to the Ultimarc Ultimate IO board. Also known as the "U-HID Harness Type 4", Ultimarc part #L4B.

Connect a joystick with .187 microswitches to a 5-pin Sanwa JLF-H harness.

Connect a 5-Pin joystick such as a Sanwa JLF to a harness designed for .187 switches.