The I-PAC is the ideal interface for connecting arcade controllers such as pushbuttons and joysticks to your computer!

The I-PAC 4 is just like the I-PAC 2 but supports 64 inputs to build 4 player arcade controllers!

The A-PAC is the ideal interface for connecting analog arcade controllers such as steering wheels and gas pedals to a MAME machine.

The Opti-PAC is an interface for easily connecting optical-type arcade control devices including trackballs and spinners to a PC for use with emulators such as MAME.

The J-PAC is a board which allows plug-in connection of a JAMMA arcade cabinet to a VGA card and USB port on a PC. It incorporates all the advanced features of the I-PAC with an on-board JAMMA connector. Includes USB and VGA Cables.

The J-PAC is a board which allows plug-in connection of a JAMMA arcade cabinet to a USB port on a PC. It incorporates all the advanced features of the I-PAC with an on-board JAMMA connector. Includes USB cable.

The PacDrive is a low-cost driver board for devices such as LEDs, solenoids, lamps, etc.

64 channel LED controller with full dimming, flash storage and more. Includes connector housings, USB cable, and power cable.

Similar to an I-PAC2 but with the ease of plug-in harnesses like the Ultimate I/O. This Mini-Pac includes the .187in/4.8mm Harness for use with joysticks and buttons that all have .187in microswitch connections.

Similar to an I-PAC2 but with the ease of plug-in harnesses like the Ultimate I/O. This Mini-Pac includes the Goldleaf combo harness for use with .187in/4.8mm Joystick connections and .110in/2.8mm Button connections.

This harness allows you to connect a SpinTrak and U-Trak to the Ultimarc Mini-Pac board. Also known as the "U-HID Harness Type 2".

Advanced PC interface for arcade buttons, joysticks and LEDs. Includes USB cable, and 5v power cable.

Bundle of 33 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting buttons and joysticks to the Ultimarc Ultimate I/O Controller. Plugs directly into Ultimate I/O board. Include a black daisy-chain wire with 32 0.187" (4.8mm) spade connectors for the ground connections.

Bundle of 33 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting joysticks and 0.110" (2.8mm) spade connectors for connecting our Goldleaf buttons, or others with .110" connectors, to the Ultimarc Ultimate I/O Controller. Plugs directly into Ultimate I/O board. Include a black daisy-chain wire with 0.187" (4.8mm) spade connectors for the ground connections on joysticks and 0.110" (2.8mm) spade connectors for ground connections on the buttons.

Two harnesses with 8 wires, 14" long, with 0.187" (4.8mm) spade connectors for connecting buttons and joysticks to the Ultimarc Ultimate I/O Controller. Plugs directly into the Player 3-4 connectors on the Ultimate I/O board. Include a black daisy-chain wire with 32 0.187" (4.8mm) spade connectors for the ground connections.

Two harnesses, one with 0.187in (4.8mm) spade connectors for joysticks and one with 0.110" (2.8mm) spade connectors for goldleaf buttons, for the Ultimarc Ultimate I/O Controller. Plugs directly into the Player 3-4 connectors on the Ultimate I/O board. Includes black daisy-chain wires for the ground connections.

Bundle of 10 wires, 23" long, with 0.110" (2.8mm) spade connectors for connecting buttons with .110 connections to the Ultimarc Ultimate IO board. Also known as the "U-HID Harness Type 4", Ultimarc part #L4C.

Bundle of 10 wires, 23" long, with 0.187" (4.8mm) spade connectors for connecting joysticks/buttons to the Ultimarc Ultimate IO board. Also known as the "U-HID Harness Type 4", Ultimarc part #L4B.

Bundle of 10 wires, 22" long, with 0.250" (6.3mm) spade connectors for connecting LED buttons to the PacLED64 or Ultimate IO LED Controller.

USB kit for Ultimarc SpinTrak spinner

USB kit for Ultimarc U-Trak trackball

Zebsboards Digital/Analog Plunger v5 for Virtual Pinball. Includes nudge and tilt support, as well as 11 button inputs for coin, start, flippers, and more. Color may vary. Optional expansion board available to increase to 32 inputs.

1 player arcade wiring kit for I-PAC

2 player arcade wiring kit for I-PAC

4 PCB feet with #6 5/8" self tapping screws for mounting.

12 PCB feet with #6 5/8" self tapping screws for mounting.

4 Stick-On PCB feet for mounting PCBs to metal or plastic.

12 Stick-On PCB feet for mounting PCBs to metal or plastic.

A 6ft USB extension cable for use with all our I-PAC boards and USB adapters. Need to mount it farther from your computer, this is what you need to extend the cable!

Use to extend wires on RGB LED buttons, Ultimarc SpinTrak Spinners, or U-Trak Trackballs.

Bluetooth dongle by CSR for use with the Ultimarc BlueHID

The U-HID is Ultimarc's most versatile input/output interface with 50 connections.

The Blue-HID is Ultimarc's wireless input/output interface with 36 connections. Perfect for building a portable/wireless fight stick, hitbox, or control panel!